
SEMPERPAC 2SN-K Compact hydraulic hose with steel braid: higher operating pressure, smaller bend radius. Exceeds the requirements of DIN EN 857 2SC / SAE 100 R16S. Inner layer: Synthetic rubber, resistant to hydraulic oils (HL, HLP, HLPD, HVLP, HFA, HFAS, HFB, HFC) Strength...
SEMPERPAC 2SN-K
Compact hydraulic hose with steel braid: higher operating pressure, smaller bend radius.
Exceeds the requirements of DIN EN 857 2SC / SAE 100 R16S.
Inner layer: Synthetic rubber, resistant to hydraulic oils (HL, HLP, HLPD, HVLP, HFA, HFAS, HFB, HFC)
Reinforcing layer: Two layers of high-strength steel braiding
Outer Layer: Wear-resistant and ozone-friendly synthetic rubber (various outer cover types available)
Temperature range: -40°C to 100°C / -40°F to +212°F (peak short-term temperature up to 120°C / 248°F)
Marking: Embossed trademark
Designation example: 2SN-K DN 10 3/8" EXCEEDS EN 857 2SC/SAE 100 R16-S/SAE 100 R19 WP 385 BAR 5585 PSI ...
| Standard size | Hose inner diameter | Reinforcement diameter | Hose outer diameter | Working pressure | Burst pressure | Minimum bend radius | Weight | ||||||||||||||||||
| mm | inch | dash | mm | inch | mm | inch | mm | inch | bar | psi | bar | psi | mm | inch | kg/m | lb/ft | |||||||||
| 6 | 1/4 | 4 | 6.6 | 0.26 | 11.5 | 0.45 | 13.4 | 0.53 | 450 | 6525 | 1800 | 26100 | 45 | 1.8 | 0.27 | 0.18 | |||||||||
| 8 | 5M16 | -5 | 8.3 | 0.33 | 13.0 | 0.51 | 15.0 | 0.59 | 420 | 6090 | 1680 | 24360 | 60 | 2.4 | 0.32 | 0.22 | |||||||||
| 10 | 3/8 | 6 | 9.9 | 0.39 | 14.7 | 0.58 | 16.8 | 0.66 | 385 | 5585 | 1540 | 22340 | 70 | 2.8 | 0.38 | 0.26 | |||||||||
| 12 | 1/2 | -8 | 13.0 | 0.51 | 18.4 | 0.72 | 20.5 | 0.81 | 350 | 5075 | 1400 | 20300 | 90 | 3.5 | 0.52 | 0.35 | |||||||||
| 16 | 5/8 | -10 | 16.4 | 0.65 | 21.9 | 0.86 | 23.7 | 0.93 | 290 | 4205 | 1160 | 16820 | 130 | 5.1 | 0.61 | 0.41 | |||||||||
| 19 | 3/4 | -12 | 19.5 | 0.77 | 26.0 | 1.02 | 27.7 | 1.09 | 280 | 4060 | 1120 | 16240 | 160 | 6.3 | 0.79 | 0.53 | |||||||||
| 25 | 1 | -16 | 26.0 | 1.02 | 32.9 | 1.30 | 35.6 | 1.40 | 200 | 2900 | 800 | 11600 | 210 | 8.3 | 1.15 | 0.77 | |||||||||
| 31 | 1-1/4 | -20 | 32.5 | 1.28 | 40.5 | 1.59 | 43.5 | 1.71 | 175 | 2540 | 700 | 10160 | 300 | 11.8 | 1.57 | 1.06 | |||||||||
| Pulse load testing up to 1,000,000 cycles!* | |||||||||||||||||||||||||
Ultra-flexible hose with two layers of steel braid
20% higher operating pressure than standard braided hoses
Bend radius is approximately 50% smaller than standard braided hoses
Impulse testing confirms up to 1 million cycles (200,000 cycles for standard braided hoses)