Products

Study in depth and focus on growth｜Company Chairman Li Xinfa attended Tsinghua University's EMBA Executive Training Series.

Deep study of the Central Asian market｜Zhengzhou Haida Hydraulics will debut at UZSTROY EXPO in Uzbekistan in 2026.

Send Care During the Mid-Autumn Festival and Warm the Sea | Zhengzhou Haida Hydraulics Launches Charity Activities in Honor of Mid-Autumn Festival

Haida Hydraulic fulfilled an order for 5000 meters of hydraulic hoses and shipped them from the warehouse!

Real pictures of Hyde hydraulic hose warehouse, sufficient stock to ensure delivery of hydraulic hose orders

The Parker C752-8 high pressure hydraulic hose is designed to withstand harsh engineering environments.

5CNG Compressed Natural Gas (CNG) Hose with Electrically Conductive Core

481 Single layer steel braided hose

791TC Hose with wear-resistant outer coating

LT795 Litong Hoses

LT795 Ultra High Pressure Resin Hose, Working Pressure 10000 PSI Product Application: Suitable for conveying water, hydraulic fluid and other high pressure media, widely used in high pressure cleaning and related industries. Inner layer: nylon. Army...

Send a request

Description

marker

LT795

Ultra High Pressure Resin Hose, 10000 PSI Working Pressure

Product Application: Suitable for transporting water, hydraulic fluid and other high pressure media, widely used in high pressure cleaning and related industries.

Inner layer: nylon.

Reinforcement: four-layer steel wire braid.

External coating: black or colored polyurethane.

Temperature range: -40°C to +100°C (-40°F to +212°F).

Specifications

	Hose inner diameter		Hose outer diameter	working pressure		Burst pressure		Minimum bend radius	Reference weight
Dash	V.	(mm)	(mm)	MPa	psi	MPa	psi	(mm)	g/m
-4	1/4	6.3	15	69	10000	207	30000	110	255
-5	5/16	7.9	17	69	10000	207	30000	130	310
-6	3/8	9.5	19	69	10000	207	30000	150	375
-8	1/2	12.7	22	69	10000	207	30000	200	570

Product Application

Oil, gas and marine industries for chemical injection, subsea hydraulic components control, subsea well control, etc., suitable for ultra-long pipelines.

Application of water jet technologies

Operating conditions up to 4,000 bar (58,000 psi):

- Demolition using ultra-high pressure water jetting (e.g. removal of reinforced concrete)

- Pipeline cutting

- Cutting paper or steel

- Industrial cleaning requiring ultra-high pressure:

- Cleaning tanks and containers

- Surface treatment

- Cleaning building surfaces

- Paint removal

Application for pre-tensioning bolts

Onshore and offshore bolt pretensioning systems and hydraulic torque wrenches.

Pressure testing equipment for valves, instruments, control panels, maintenance equipment, etc.

Cleaning heat exchangers with small diameter tubes, etc.

Choosing the right product

You can choose the appropriate product model based on the following aspects:

Working pressure: determined by operating conditions, including working pressure, pulsation and required safety factor;

Operating temperature: including average/minimum operating temperature and ambient/minimum temperature;

Working environment: the physical and chemical properties of the environment have a decisive influence on the choice of hose material;

Special environmental requirements: Certain operating conditions place special demands on abrasion resistance, aging resistance, bending wear resistance, ripple resistance and bending radius (contact our sales representatives for customized solutions);

Selection of fittings: The selection of suitable fittings is fundamental to the production of suitable prefabricated structures. Effectively selecting (or designing) fittings according to equipment specifications greatly improves the efficiency of prefabrication production.